LED Dusk to Dawn Rugged and Reliable Outdoor Lighting

Simkar LED Dusk to Dawn
DTDHOLED35 Dawn to Dusk LED Area LightDTDHOLED70W Dawn to Dusk LED Area LightDTDLED25 Dawn to Dusk LED Area Light

Simkar

Rugged, Reliable Performance

Ideal for use in security, driveway, parking, walkway, stair, work area, and other utility applications

Comparable to 70 – 250W PSMH
2000 Lumens • 25W
2860 Lumens • 35W
5900 Lumens • 70W

Product Documentation

Category: Brands: .

Product Description

Simkar’s Dusk-to-Dawn LED fixtures are built to withstand rugged outdoor environments and operate in all weather conditions while providing bright, reliable light. With up to an 80,000 hour operating life (L70), our DTD LED luminaires will perform for many years, providing energy savings with excellent performance.

Very High Output (FLAGSHIP MODEL): DTDHOLED70W

  • Consumes 69W; up to 75% energy savings vs. traditional HID sources
  • Light output 5900 lumens; replaces up to 250W PSMH
  • 60,000 hour operating life (L70)
  • 5000K color temperature, >70 CRI
  • Wide 120° beam spread
  • Instant-on operation after power interruption
  • C-UL-US listed wet location
  • DesignLights ConsortiumTM Qualified

HOUSING Rugged die-cast aluminum housing with powder coat gray finish. Heat dissipating fins provide increased surface area thermal management. Internal slip fitter for wall or pole mount.

LEDS 60,000 hour operating life (L70). Consumes 69W with delivered light output of 5900 lumens, 5000K color temperature, >70 CRI. Light engine consists of LED chip on board (COB) array mechanically secured via a trim ring and mounted to aluminum heat sink.

OPTICS Enclosed and gasketed prismatic polycarbonate lens and aluminum reflector produce 120 degree beam spread; type V distribution.

ELECTRICAL Power supply is 120V, 0-10V dimmable, power factor >0.9, with output current of 1600mA. Integral 6kV surge protection. Power supply is mounted directly to heavy gauge aluminum plate for cooler fixture operation and longer life. NEMA rated photocell will only operate at 120V. The DTDHOLED70W is designed to operate in temperatures of -40°F (-40°C) to 113°F (45°C).

ACCESS / WIRING Through-arm wiring enables mounting directly to the wall or via included 24” (11” standoff) aluminum arm.

MOUNTING Direct surface mount using 1/4” slots via lag bolts (included), with standard 1-5/8” to 2 5/8”diameter pole mount, or included 24” (11” standoff) aluminum arm.

PHOTOCELL Replaceable 120V NEMA twist & lock photocell included.

LISTINGS C-UL-US Listed wet location. DesignLights Consortium™ Qualified.

WARRANTY 5 year limited warranty.

High Output: DTDHOLED35

  • Consumes 37W, up to 80% energy savings vs. traditional HID sources
  • Light output 2860 lumens, replaces up to 175W PSMH
  • 50,000 hour operating life (L70)
  • 4100K color temperature, >80 CRI
  • Instant-on operation after power interruption
  • C-UL-US listed wet location
  • DesignLights ConsortiumTM Qualified

HOUSING Rugged die-cast aluminum housing with powder coat gray finish. Die-cast heat dissipating fins. Internal slip fitter.

LEDS 50,000 hour operating life (L70). Delivered light output of 2858 lumens (37W), 4100K, >80 CRI. LEDs are LM-80 tested.

OPTICS Enclosed prismatic acrylic lens. Use with full cutoff shield accessory to meet Dark Sky requirements.

ELECTRICAL Power supply is 120-277V, power factor >0.9, with output current of 930mA. Operation is 120V only when used with the included 120V NEMA twist & lock photocell. The DTDHOLED35 is designed to operate in temperatures of -22˚F (-30˚C) to 104˚F (40˚C)

ACCESS / WIRING Through-arm wiring enables mounting directly to the wall or via included 24” (11” standoff) aluminum arm.

MOUNTING Direct surface mount using 1/4” slots via lag bolts (included), with standard 1-5/8” to 2 5/8”diameter pole mount, or included 24” (11” standoff) aluminum arm.

PHOTOCELL Replaceable 120V NEMA twist & lock photocell included.

LISTINGS C-UL-US Listed wet location. DesignLights ConsortiumTM Qualified.

WARRANTY 5 year limited warranty.

Standard Output: DTDLED25

  • Consumes 24W, up to 74% energy savings vs. traditional HID sources
  • Delivered light output of 2000 lumens (replaces up to 70W PSMH)
  • 80,000 hour operating life (L70)
  • 4100K color temperature, >80 CRI
  • Instant-on operation after power interruption
  • C-UL-US listed wet location
  • DesignLights ConsortiumTM Qualified

HOUSING Rugged die-cast aluminum housing with powder coat gray finish. Cast heat dissipating fins. Internal slip fitter.

LEDS 80,000 hour operating life (L70). Delivered light output up to 2007 lumens (24W), 4100K, >80 CRI. LEDs are LM-80 tested.

OPTICS Enclosed prismatic acrylic lens.

ELECTRICAL Power supply is 120-277V, power factor >0.9, with output current of 580mA. Integral 1kV surge protection. Operation is 120V only when used with the included 120V NEMA twist & lock photocell. The DTDLED25 is designed to operate in temperatures of -22˚F (-30˚C) to 104˚F (40˚C).

ACCESS / WIRING Through-arm wiring enables mounting directly to the wall or via included 24” (11” standoff) aluminum arm.

MOUNTING Direct surface mount using 1/4” slots via lag bolts (included), with standard 1-5/8” to 2 5/8”diameter pole mount, or included 24” (11” standoff) aluminum arm.

PHOTOCELL Replaceable 120V NEMA twist & lock photocell included.

LISTINGS C-UL-US Listed wet location. DesignLights ConsortiumTM Qualified.

WARRANTY 5 year limited warranty.